Cute DIY Cabinet Knobs Made From Concrete

Struggling to find a beautiful-looking set of knobs for your vanity or your dresser? Why not but make your own? Sure, there'due south plenty of different designs out at that place that you could choose from but none would actually be as special and those made with your own hands from scratch. Also, making chiffonier knobs from concrete is actually super simple and there's no reason why yous shouldn't at least try it.

Materials that you'll demand for these concrete knobs:

physical mix
water
bowl
spoon
middle shaped silicone mould
paint brush
white and pink acrylic hurting
screws

How to craft these cute physical knobs:

Footstep ane: Mix the concrete with water

Once all the supplies are gathered and fix to go, kickoff combining the concrete mix with the some h2o in a bowl. Preferably you'd use a disposable plastic basin and a plastic spoon for this since you won't be able to clean them or reuse them after this. Follow the instructions on the packing to figure out how much concrete mix and h2o to employ. Then blend them together with the spoon to create a smooth paste.

Step two: The next step is to pour the concrete mixture into the silicone moulds. We chose a center-shaped mould because we wanted the knobs to look similar little hearts just you can definitely choose a different shape if y'all desire to. Take some of the physical mixture and pour it into each mould using the spoon. Fill as many as you want, maybe also considering making some actress knobs in case yous want to do on a few or in case some pause.

Step 3: Insert ane screw into each little concrete heart

When you lot're done pouring the concrete mixture into the moulds, insert one screw into each one making sure it'south with the flat side down. Try to center the screws and to insert them in the aforementioned spot and then the knobs look level and lined up when you install them. Also, brand sure the screws sit down upright. Then let the concrete dry and harden overnight or for at to the lowest degree a few hours.

Step iv: Remove the physical hearts from the mould

Later the concrete has hardened, go ahead and pop out the little hearts. Be gentle so you don't impairment them. The silicone mould is flexible then you tin can easily curve it to make the procedure easier and smoother.

Step 5: Utilize a base of operations coat of paint

Earlier yous really move onto this part, yous might demand to apply a bit of sandpaper to smooth out some of the edges or correct some imperfections if needed. Then employ your paintbrush to employ a glaze of pastel pink pigment onto the surface of each knob. This will be the base coat for your pattern.

Pace 6: Add together the details using white paint

When the pinkish paint has dried, you can start adding all the little details of your design using white acrylic paint. Once once more, feel complimentary to choose any other combination of colors if this one doesn't accommodate your needs or style. You lot tin besides go with the same pattern for all the knobs or you can try something different for each one. Accept fun experimenting with a few patterns before you settle on a final design.